本田设计理念是机器人将与无线工具一起工作，所以机器人手指是否灵巧并不重要。E2-DR可以将其躯干旋转180度，手可以抓握，使其能爬上楼梯。

Honda s design concept is that robots will work with wireless tools, so it is not important to know whether the robot fingers are smart or not. The E2-DR can rotate its torso 180 degrees, and the hand can hold it so that it can climb up the stairs.

机器人本身能够以2公里/小时的速度行走，穿过200毫米的管道，走上碎片，步行穿过26毫米/小时的雨水20分钟，并爬上一个垂直的梯子。

The robot itself can walk at a speed of 2 km / h, go through 200 millimeters of pipe, walk on debris, walk through 26 millimeters / hour of rain for 20 minutes, and climb up a vertical ladder.

E2-DR高168厘米，却仅有有25厘米厚，所以它可以通过30厘米或更宽的小间隙。

E2-DR is 168 centimeters tall, but only 25 centimeters thick, so it can pass 30 centimeters or wider small gap.

E2-DR可以在1,000Wh的电池支撑下一次运行90分钟，可在-10至40摄氏度之间的温度下工作，并具有内部冷却系统以阻止其过热。E2-DR的头部有两台激光测距仪，几台摄像机和一台红外线投影仪组成。机器人的手也有相机和3D摄像机嵌入。

The E2-DR can run for 90 minutes at the 1000Wh s battery support, operating at temperatures between -10 and 40 degrees Celsius, and with an internal cooling system to prevent overheating. E2-DR s head consists of two laser range finders, several cameras and an infrared projector. The robot s hand is also embedded with cameras and 3D cameras.

虽然所有这些功能到目前为止听起来都非常令人印象深刻，但本田表示，E2-DR目前是一个原型，在实际变得有用和可行之前，需要做很多工作。

While all of these functions have sounded very impressive so far, Honda says E2-DR is now a prototype, and a lot of work needs to be done before it actually becomes useful and feasible.

【此文章原创来自于158机床网转载请注明出处】