卧式加工中心系列 Horizontal CNC machining center >>> 主要技术参数Technical Parameters 产品介绍Product introduction GSHM系列卧式加工中心采用国际流行的倒T型立柱移动式结构，具有自动换刀装置及CNC三轴、四轴联动控制系统的现代化加工机床，在一次装夹后，可以自动连续对四个面进行铣、钻、扩、铰及攻丝等多种工序加工，适用于中等批量生产的各种平面、孔、复杂形状表面的加工，节省工装，缩短生产周期，提高加工精度，是汽车制造、工程机械、航天航空、电子工业、军械工业等部门理想的加工设备。 ·机床采用倒“T”型布局，立柱移动，刚性好。 ·主轴采用宽裕电机驱动，扭矩大。 ·分度台为1×360，鼠齿盘定位，定位精度高。 ·数控转台为连续分度，采用德国进口INA平板式推力向心球轴承，以保证良好的传动刚性及稳定性，高精度圆光栅检测，保证高定位精度。 ·三向进给驱动选用大惯量宽调速交流伺服电机与滚动丝杠直联，联轴器采用意大利席特公司无间隙联轴器，保证无隙传动，同时其良好的刚性与优化的减振性能，极大的改善了传动系统的动态刚性，可实现15m/min快速移动速度。 ·换刀装置采用台湾刀库凸轮机械手，性能可靠，换刀时间短。 ·机床导轨采用宽包容窄导向的设计原则，导轨淬火磨削，硬度可达HRC52以上，与其相配的导轨面贴塑，并采用间歇集中润滑，机床运动平稳，精度保持性好。 ·良好的性价比，出厂精度按国家标准压缩30％，属精密级加工中心。 ·整机采用三维造型设计，美观大方。标准配件Standard Accessories 可选配件Oprional Accessories 机械特性Machanical Features 24把圆盘凸轮机械手刀库螺旋自动排屑器冷却系统（集屑槽）自动润滑工作台分度 1×360 全防护数控系统 FANUC Oi-MC 显示单元 8.4″液晶手持操作单元 30把圆盘凸轮机械手刀库 40把链式凸轮机械手刀库 BT50主轴链板式自动排屑器大流量冷却系统工作台分度 5°×72 简易防护全闭环主轴刀具内冷系统数控系统 SIEMENS 802D/810DE 显示单元 10.4″液晶手持操作单元 (电子手轮) C-1 C-2 Horizontal Machining Center: GSHM series uses traveling column of international back T mode. It is an international machining tool, which is equipped with automatic tool change-over, 3 axes, 4 axes linkage control system. After filled in firstly, it can make milling, drilling, reaming, tapping and many different kinds of machining for the four sides of workpiece automatically. The machine is applied to process workpiece with complicate surface and hole. It has the following virtues: saving tool set-up, shortening produce time, improving machining accuracy. It is the ideal machining tool for auto manufacture, engineering manufacture, spaceflight & aviation, electron industry, ordnance industry and so on. ·T-mode distribution, traveling column, hard rigidity ·Ample motor driving and torque ·1º×360 rotary table, rat-tooth disk fixation, fixing position with high accuracy ·CNC swivel table can calibrate continuously and use INA annular ball bearing imported from Germany to keep good transmission, stability, DRO inspection with high accuracy and high position accuracy. ·3-direction feed driving uses huge principal AC servo motor with wide speed regulation to connect with ball screw directly. Junction box uses blind junction box imported from Italy. On the one hand, it can keep transmission without gap. On the other hand, it has good rigidity and cushioning ability to improve moving rigidity of transmission system to realize fast moving speed of 15m/min. ·Tool-changer use Taiwan tool magazine with jaw mechanical arm, which has the virtues of good stability and short tool-change time. ·The machine slide uses design principle of wide content and slim direction. The hardness of quenched dressing slide can reach HR52. The attached surface plastic of slide uses interval & centralized lubrication. Thus, the machine moves smoothly and can keep good accuracy. ·Fair price and good performance. Delivery accuracy is 30% above the national standard. It is belong to precision CNC machining center. ·The whole machine uses three-dimensional design. It is simple and artistic. 24 tool magazine with jaw mechanical arm Propeller automatic chip conveyor Coolant supply Automatic lubrication 1°×360 rotary table Completely enclosed with sliding doors Control system FANUC 0i-MC Monitor 8.4” LCD screen Manual operating unit 30 tool magazine with jaw mechanical arm 40 tool magazine with jaw mechanical arm Spindle: BT50 Slatted-chain automatic chip conveyor Coolant supply 5°×72 rotary table Simple protection Loop control Coolant supply through the main spindle Control system SIEMENS 802D/810DE Monitor 10.4” LCD screen Smanual operating unit(electric handle) 主要规格及技术参数Main specification GSHM7060A GSHM7060B GSHM7060C GSHM7060D 工作台 Table 工作台面积mm Table size 500×500 最大载重kg Max.Load 600 最小分度角度度Min.Indexing angle 1°×360转台NC Rotray table 0.001° T行槽T-slot 5×18×100 行程 Travel X轴行程mm X travle 720 Y轴行程mm Y travle 600 Z轴行程mm Z travle 620 主轴中心线至工作台面距离mm Distance from spindle center line to table surface 100-700 80-680 100-700 80-680 主轴端面至工作台中心距离mm Distance form soindel end face to table center 150-750 主轴 Spindle 主轴转速rmp Splindle speed 20-6000 主轴锥孔Splindle taper ISO 7:24/BT40 主轴轴径mm Splindle dismeter 80 主轴电机kW Splindle motor 18.5/22 控制系统 Control system 数控系统Control system FAUNC oi-MC/(SIEMENS 802DSL) XYZ伺服电机XYZ servo motor FAUNC 3KW/7KW/4KW 进给速度 Feed speed 快速移动速度mm/min Rapid traverse 18000 切削进给速度mm/min Cutting feed speed 1-8000 自动换刀 ATC 刀库容量Tool capacity 24 刀柄/拉钉形式Type of tool handle/draw bar MAS403/BT40 刀具最大直径/长度/重量Max.tool diameter/length/weight 77mm/320mm/8kg 刀具最大直径(相邻无刀) Max.tool diamete(null tool) 130 刀具选刀方式Tool selection way 随机Random 刀具交换时间(刀-刀) 秒(s) Change time(tool-tool) 3 托盘交换 APC 托盘数个Number of pallet / 2 / 2 托盘交换方式Paller change type / 旋转 rotary / 旋转 rotary 托盘交换时间秒(s) Paller change time / 15 / 15 其它 Other 电源容量KVA Power capacity 40 气源、气压Air Source,Air pressure 205L/min. 0.5-0.7Mpa 切削液槽容量L Capacity of cuttingflume 260 机床重量(净重/毛重) kg Machine weight(Net/Gross) 12000/13000 13000/14000 12000/13000 13000/14000 机床外形尺寸mm Overall dimensinos 5000×2400×2800 包装箱尺寸mm Package size 5200×2500×2950 资料如有更改，恕不另行通知。infomation for reference only,Subject to chance without notice.
